Slant Type Lathe
Machine Features
HT3 CNC lathe ndeye maviri-axis yekubatanidza, yakavharika-yakazara-loop CNC muchina chishandiso.Muchina wemuchina-yemagetsi-hydraulic wakabatanidzwa kurongeka unotora chivharo chekudzivirira chakavharwa, gonhi rinovhurika kuruboshwe, uye tafura yekushanda iri kumucheto wekurudyi kwechivharo chekudzivirira chakagadziriswa kuti chishande nyore.Imwe neimwe servo feed shaft inotora yakakwira-kumhanya yakanyarara bhora screw, elastic coupling yakabatana zvakananga, inokurumidza kufamba kukurumidza, yakaderera ruzha, yakakwirira chinzvimbo kurongeka uye yakadzokororwa chinzvimbo;iyo servo mota inoshongedzerwa neyakakwana kukosha encoder, hapana chikanganiso chekuwedzera, hapana ndangariro, Hapana chikonzero chekutsvaga chinongedzo, ruzivo rwechinzvimbo haruzorasikirwe mushure mekunge simba ragurwa.Chishandiso chemuchina chine mabasa akasimba, kurongeka kwepamusoro, dhizaini inonzwisisika, chitarisiko chakanaka, kushanda kuri nyore uye kugadzirisa kuri nyore.
Tsanangudzo
| Tsanangudzo | Unit | HT2 | HT3 | HT5 | HT6 |
| Spindle musoro | Type | A2-5 | FL 140 h5 / A2-6 | FL 170 h5 | |
| Spindle maximum speed | rpm | 5000 | 4500 | 4000 | |
| Spindle simba | kW | 5.5-7.5 | 7.5-11 | 11-15 | 15-18.5 |
| Chuck dhayamita | mm | 165 | 210 | 250 | |
| Spindle yakaboora | mm | 52 | 74 | 87 | |
| Mberi inotakura dhayamita | mm | 80 | 100 | 130 | |
| Spindle inotakura lubrication | / | Gira mafuta | |||
| Linear inofamba lubrication | / | Mafuta | |||
| Speed range | rpm | 5-5000 | 5-4500 | 5-4000 | |
| Nzvimbo yebasa | |||||
| Maximum swing pamusoro pemubhedha | mm | 520 | 558 | 576 | 670 |
| Maximum yekucheka dhayamita | mm | 260 | 340 | 348 | 400 |
| Maximum yekucheka urefu | mm | 200 | 350 | 500 | 550 |
| Kufamba kweZ-axis | mm | 250 | 380 | 525 | 600 |
| Kufamba kwe X-axis | mm | 150 | 180 | 225 | 267 |
| Ball screw | |||||
| X/Z axis bhora sikuruu DxP | mm | 32 x 10 | 40x10 | ||
| Feed | |||||
| Kurumidza kufamba Z | m/min | 30 | |||
| Kukurumidza kufamba X | m/min | 30 | |||
| Kudyisa simba re axis | |||||
| Kudyisa simba X/Z | N | 3200 | 4500 | 7500 | |
| Axis Qty. | 2 | ||||
| Measuring system | |||||
| X/Z axis yekuyera sisitimu | Absolute encoder | ||||
| (X / Z); VDI/DGQ 3441 Positioning | mm | 0.006/0.006 | 0.008/0.008 | 0.008/0.01 | |
| (X/ Z); VDI/DGQ 3441 Kudzokorora | mm | 0.004/0.004 | 0.004/0.005 | 0.005/0.008 | |
| Tool attachments | |||||
| Tool Qty. | Chiteshi | 12 | |||
| Turret dhisiki mhando | - | Slot disk | SAUTER | ||
| Tool attachment | mm | □25 Ø40 | |||
| Madiro emagetsi | |||||
| Voltage | V | 380 ±10% | |||
| Frequency | Hz | 50 ± 1% | |||
| Max.yakaiswa simba | KVA | 20 | 25 | 35 | |
| 400v nhema dziviriro fuse | A | 63 | |||
| Chikamu chetambo dzekubatanidza | mm2 | 4 x 10 | |||
| Hydraulic unit | |||||
| Max.kushanda kumanikidza | bar | 35 | 45 | 50 | |
| Reservoir capacity | l | 20 | 35 | ||
| Kuyerera kwepombi | Ndiri mu | 24 | |||
| Inotonhorera system | |||||
| Kugona ne tangi | l | 100 | 150 | 180 | |
| Pombi kutumira | l/min | 30 | |||
| Pombi pressure | bar | 5 | |||
| Noise level | |||||
| Zvishoma pane | dB (A) | ≤80 | |||
| Kudzora system | |||||
| Controller | FANUC 0i-TF pamwe chete | ||||
| Net uremu | kg | 2800 | 3200 | 4000 | 5500 |
| Slant angle, Material | ° | 45°, HT300 | |||
